In part 1, Retrofit Single Ply Roof Systems: An Assessment of Wind Resistance, we provided information about the following: Four...
Has The Wide Range of Single-Ply Attachment Options Got you Stuck?
Proven Performance: GAF releases aged TPO study
Value Engineering Part 2: Retaining Performance
Designing for Moisture Durability & Energy Efficiency
Parapets Part 3: An Example of Complexity
Parapets Part 2: Navigating Codes
When to consider a mid-reflectance TPO color
Buildings with Electric Heat – Do Reflective Membranes Still Make Sense?
Value Engineering — Optimizing Performance or Reducing Costs?
Low-Slope Roofing Mistake No. 10: Missing Base Attachments
Low-Slope Roofing Mistake No. 9: Short Flashings
Low-Slope Roofing Mistake No. 8: Missing Cut Edge Sealant
Low-Slope Roofing Mistake No. 7: Missing T-Joint Patches
Low-Slope Roofing Mistake No. 6: Not Meeting Minimum Weld Width
Low-Slope Roofing Mistake No. 5: Angle-Change Voids
Low-Slope Roofing Mistake No. 4: Inadequate half-sheet fastening
Low-Slope Roofing Mistake No. 3: Welding start-and-stop voids
Low-Slope Roofing Mistake No. 2: Not cleaning the membrane
R-Value Optimization: A Case Study
Coatings Challenge: Converting a warehouse into condominiums with a new roof.
Coatings Challenge: A structurally sound roof on a beautiful stucco building
Fresh Thinking About Cold Storage Roofs
Are You Considering Adaptation in Your Roof Design?
Solar Power is Now Competitive
Helene Hardy Pierce Awarded Roofing Industry’s Highest Honor
Building Science FAQ — Ep. 5
Advantages of Long-Life Roofing for Bifacial Solar Panels
Building Science FAQ — Ep. 3
“Sustainable” and “Resilience” — Are they related, the same, or opposites?
CRF3: Insulation for Low Slope Roofs
CRF1: The Impact of Buildings on Energy Usage
Air Barriers and Vapor Retarders: The Current Conundrum in the Roofing Industry
Protect Your Investment: Understand Your Guarantee
Proactive vs Reactive Maintenance
Coatings Challenge: A steep slope roofer looks to expand his business.
Commercial Roofing
Articles
Examining attachment options There are more adhesives and application methods for single-ply roof assemblies available today than ever before. This...
Introduced as a roofing membrane in the 1960s, and first marketed in the U.S. as a commercial roof membrane in...
In the first Value Engineering post about the attributes of high performing roof designs, value engineering is defined as “a...
There can be a perception in the market that a “green building” is a better building, and that the risks...
Wind design of roof systems is one of the more complicated things that an architect deals with during the design...
Part 1 of our discussion of parapets (Continuity of Control Layers) explored the many reasons continuity of water, air, thermal,...
Part 1 of our discussion of parapets (Continuity of Control Layers) explored the many reasons continuity of water, air, thermal,...
Get the Advantages of Welded Seams and Energy Savings, with a Non-White Membrane Imagine a roof design you are specifying, but...
A Case Study Shows the Minimal Impact of the Winter Sun There has been a school of thought that dark...
Recent Comments
Thank you for your comment Norm. We haven't seen wrinkling or underlayment that may not be completely flat causing the situations that you mentioned,
Installation instructions for GAF's FeltBuster synthetic underlayment indicate to "install without wrinkles". The obvious reason why wrinkles must be eliminated is to avoid telegraphing […]